Comparison Console
Benchmade AFCK vs Spyderco Dodo
EDC Knives comparison. Compare price, weight, specifications, materials, and real-world use case.
Command Brief
Recommended read
Spyderco Dodo stands out as the lightest option for weight, with about a 31% gap from the closest alternative. Benchmade AFCK stands out as the cheapest option for retail price, with about a 38% gap from the closest alternative.
Decision Signals
What stands out
Benchmade AFCK stands out as the cheapest option for retail price, with about a 38% gap from the closest alternative.
Spyderco Dodo stands out as the most expensive option for retail price, with about a 63% gap from the closest alternative.
Spyderco Dodo stands out as the lightest option for weight, with about a 31% gap from the closest alternative.
Benchmade AFCK stands out as the heaviest option for weight, with about a 46% gap from the closest alternative.
Spyderco Dodo stands out as the shortest option for closed length, with about a 18% gap from the closest alternative.
Benchmade AFCK stands out as the longest option for closed length, with about a 22% gap from the closest alternative.
Spyderco Dodo stands out as the shortest option for blade length, with about a 49% gap from the closest alternative.
Benchmade AFCK stands out as the longest option for blade length, with about a 95% gap from the closest alternative.
Specification Profile
Relative dimensions at a glance
Each axis is normalized against the largest raw value among the products in this comparison. Farther outward means a larger value, not necessarily a better result. Axes with an unverified value are omitted.
Price & carry
Retail price
US$120Cheapest
US$195Most expensive
Weight
119.7 g (4.22 oz)Heaviest
82.1 g (2.90 oz)Lightest
Dimensions
Blade length
102 mm (4.02 in)Longest
52.3 mm (2.06 in)Shortest
Overall length
235 mm (9.25 in)Longest
158.8 mm (6.25 in)Shortest
Closed length
135 mm (5.31 in)Longest
111.1 mm (4.37 in)Shortest
Blade thickness
3.175 mm (0.13 in)Thinnest
3.3 mm (0.13 in)Thickest
Materials & mechanism
Blade steel
M2 tool steel
CPM M4
Handle material
G-10 handle scales with stainless steel liner
Natural G-10
Finish
Black finish on blade, stonewashed pivot screws
Blade with satin or black DLC finish (varies by variant)
Lock type
Liner Lock
Patented Ball Bearing Lock
Opening method
Thumb Hole
Thumb Hole
Clip type
Steel pocket clip (tip down)
Reversible Wire Tension Tip-Up
Use case profile
Best for
EDC utilitySelf defenseCollectors
Everyday carryPrecision cuttingDetailed/fine cutting
Not best for
Left hand users (clip and lock are right hand oriented)
Unknown
Common praise
Very sharp blade edgeComfortable, ergonomic handleReliable liner lockDurable constructionGood for utility and self defense
Outstanding edge retention and wear resistance of CPM M4 steelStrong and reliable Ball Bearing LockErgonomic handle with finger choilsCompact size with good utility
Common complaints
Handle flex with G-10 scales (addressed in later models or by replacing scales with aluminum)Heavier compared to some other folding knivesRight hand only clip and lock
Unconventional and unusual appearance may not appeal to allShort blade length under 2 inches