Comparison Console
Benchmade AFCK vs Spyderco Tenacious
EDC Knives comparison. Compare price, weight, specifications, materials, and real-world use case.
Command Brief
Recommended read
Spyderco Tenacious stands out as the lightest option for weight, with about a 3% gap from the closest alternative. Spyderco Tenacious stands out as the cheapest option for retail price, with about a 19% gap from the closest alternative.
Decision Signals
What stands out
Spyderco Tenacious stands out as the cheapest option for retail price, with about a 19% gap from the closest alternative.
Benchmade AFCK stands out as the most expensive option for retail price, with about a 24% gap from the closest alternative.
Spyderco Tenacious stands out as the lightest option for weight, with about a 3% gap from the closest alternative.
Benchmade AFCK stands out as the heaviest option for weight, with about a 3% gap from the closest alternative.
Spyderco Tenacious stands out as the shortest option for closed length, with about a 18% gap from the closest alternative.
Benchmade AFCK stands out as the longest option for closed length, with about a 22% gap from the closest alternative.
Spyderco Tenacious stands out as the shortest option for blade length, with about a 16% gap from the closest alternative.
Benchmade AFCK stands out as the longest option for blade length, with about a 19% gap from the closest alternative.
Specification Profile
Relative dimensions at a glance
Each axis is normalized against the largest raw value among the products in this comparison. Farther outward means a larger value, not necessarily a better result. Axes with an unverified value are omitted.
Price & carry
Retail price
US$120Most expensive
US$97Cheapest
Weight
119.7 g (4.22 oz)Heaviest
116 g (4.09 oz)Lightest
Dimensions
Blade length
102 mm (4.02 in)Longest
86 mm (3.39 in)Shortest
Overall length
235 mm (9.25 in)Longest
197 mm (7.76 in)Shortest
Closed length
135 mm (5.31 in)Longest
111 mm (4.37 in)Shortest
Blade thickness
3.175 mm (0.13 in)Thickest
3 mm (0.12 in)Thinnest
Materials & mechanism
Blade steel
M2 tool steel
8Cr13MoV Stainless Steel
Handle material
G-10 handle scales with stainless steel liner
G-10 Laminate
Finish
Black finish on blade, stonewashed pivot screws
Satin or non-reflective black oxide coating
Lock type
Liner Lock
Liner Lock
Opening method
Thumb Hole
Thumb Hole
Clip type
Steel pocket clip (tip down)
Four-position Pocket Clip
Use case profile
Best for
EDC utilitySelf defenseCollectors
Daily CarryOutdoor UseBudget Tactical Use
Not best for
Left hand users (clip and lock are right hand oriented)
Heavy-duty construction workLong term intensive use
Common praise
Very sharp blade edgeComfortable, ergonomic handleReliable liner lockDurable constructionGood for utility and self defense
Incredible value for moneyReal G-10 handles, not cheap plasticAmbidextrous 4-way pocket clipFull flat grind provides excellent slicingSmooth action with bronze washersSolid lockup and good ergonomics
Common complaints
Handle flex with G-10 scales (addressed in later models or by replacing scales with aluminum)Heavier compared to some other folding knivesRight hand only clip and lock
8Cr13MoV steel requires more frequent sharpeningLiner lock is less advanced than Compression LockNot a deep-carry pocket clip; knife shows in pocketMade in China, not USA