Comparison Console
Benchmade Model 51 Morpho vs Spyderco SpydieChef
EDC Knives comparison. Compare price, weight, specifications, materials, and real-world use case.
Command Brief
Recommended read
Benchmade Model 51 Morpho stands out as the lightest option for weight, with about a 8% gap from the closest alternative. Benchmade Model 51 Morpho stands out as the cheapest option for retail price, with about a 10% gap from the closest alternative.
Decision Signals
What stands out
Benchmade Model 51 Morpho stands out as the cheapest option for retail price, with about a 10% gap from the closest alternative.
Spyderco SpydieChef stands out as the most expensive option for retail price, with about a 12% gap from the closest alternative.
Benchmade Model 51 Morpho stands out as the lightest option for weight, with about a 8% gap from the closest alternative.
Spyderco SpydieChef stands out as the heaviest option for weight, with about a 9% gap from the closest alternative.
Spyderco SpydieChef stands out as the shortest option for closed length, with about a 18% gap from the closest alternative.
Benchmade Model 51 Morpho stands out as the longest option for closed length, with about a 21% gap from the closest alternative.
Spyderco SpydieChef stands out as the shortest option for blade length, with about a 22% gap from the closest alternative.
Benchmade Model 51 Morpho stands out as the longest option for blade length, with about a 29% gap from the closest alternative.
Specification Profile
Relative dimensions at a glance
Each axis is normalized against the largest raw value among the products in this comparison. Farther outward means a larger value, not necessarily a better result. Axes with an unverified value are omitted.
Price & carry
Retail price
US$285Cheapest
US$318Most expensive
Weight
98.9 g (3.49 oz)Lightest
108 g (3.81 oz)Heaviest
Dimensions
Blade length
108 mm (4.25 in)Longest
84 mm (3.31 in)Shortest
Overall length
235 mm (9.25 in)Longest
198 mm (7.80 in)Shortest
Closed length
137 mm (5.39 in)Longest
113 mm (4.45 in)Shortest
Blade thickness
2.8 mm (0.11 in)Thinnest
3 mm (0.12 in)Thickest
Materials & mechanism
Blade steel
D2 Tool Steel
LC200N
Handle material
G-10 with titanium liners
Titanium
Finish
Stonewash or satin finish depending on variant
Satin
Lock type
Spring latch
Reeve Integral Lock (R.I.L.)
Opening method
Balisong flipping or direct open
Spyderco hole for ambidextrous one hand opening
Clip type
Tip-up titanium pocket clip (reversible for left or right hand)
Reversible wire clip, tip-up carry
Use case profile
Best for
EDC (everyday carry)Recreational flippingLight utility tasks
Everyday carryCampingKitchen tasksWater environment use
Not best for
Heavy choppingRust-prone wet environments without proper care
Unknown
Common praise
Lightweight for a balisong at roughly 3.3 ouncesDurable, strong blade tip resistant to damageSmooth action with high-quality tolerancesComfortable textured G-10 handle with finger groovesInnovative spring latch that does not open accidentally
Excellent corrosion resistanceErgonomic and balanced designSharp, precise cutting abilityVersatile for kitchen and EDC use
Common complaints
D2 steel is less rust resistant and requires careful maintenanceSpring latch can require effort to disengageLatch disengagement when open is less convenient
Requires careful handling when closing to avoid thumb injuryNeeds some loosening for optimal flick opening